Skip to main content

Online BTET 2011 Bihar Teacher Eligibility Test 2011

Bihar Teacher Eligibility Test 2011 BTET 2011
State Council of Educational Research and Training Bihar, Patna has published the application to apply for teacher eligibility test exam ,2011. State government has announced that there will be 3 lakh teachers will be recruited on the basis of this TET exam. 
Application form for Bihar TET exam 2011 will be available from 11.07.2011 to 23.07.2011.
Date of form submit – 28.07.2011 to 06.08.2011

The application is available in office of District Education Officer in each district of Bihar only. For get application you have to submit Rs. 100/-( Rs. 50/- for SC/ST) in cash to office of DEO.

The exam may be conduct in month of August 2011.
The application form will be sell in 20 places in each district. Application form will be sell in District education office, SDO office, and high schools.

Application should be submitted in same district from where you purchased the application from.

Eligibility for apply to Bihar TET exam 2011
(1) For Primary School Teacher (Class 1 to 5)
(A) Intermediate with minimum 50% marks for primary school teacher. No any appearing candidate would be consider for TET exam. Some marks relaxation has provided for diploma in education / D.Ed. or equivalent degree. Please consult the office of DEO.
(B) For the non-Bihari candidates, they should have two year diploma in education / D.Ed. or equivalent degree for apply to primary school teacher TET exam.
© 5% marks relaxation for SC/ST/Woman/Disabled.

(2) For Middle School Teacher (Class 6 to 8 )
(A) Graduate (B.A./B.Sc./B.Com/Alim/Shashtri or equivalent with minimum 50% marks for middle school teacher. Candidate should have completed degree before apply for TET. No any appearing candidate would be consider for TET exam.Some marks relaxation has provided for diploma in education / D.Ed. or equivalent degree. Please consult the office of DEO.
(B) BCA/B.E./B.Tech or any other technical degree holder are not allowable for apply to this exam.
© For the non-Bihari candidates, they should have two year diploma in education / D.Ed. /one year B.Ed. /two year B.Ed. /B.A.Ed./ B.Sc.Ed or equivalent degree for apply to primary school teacher TET exam.
(D) 5% marks relaxation for SC/ST/Woman/Disabled.

Note - (a) If you have less then 50% marks in Inter and more then 50% marks in graduation then you are eligible for apply for middle school teacher test only. You can not apply for TET for primary school teacher in this case. Remember, 50% marks or above in Inter is must for apply for primary school teacher TET. You can not apply for primary teacher school teacher TET even if you are P.Hd. holder but you have not 50% marks minimum in Inter.
(b) If you have 50% or above marks in graduation then your intermediate low or high marks does not matter to apply for TET middle school teacher. In that case you can apply for TET for middle school teacher.

© Any general candidate without B.Ed. degree or equivalent can apply for this test. But, this facility is allowable for Bihar residents candidates only. If those candidates is selected for teacher then that candidate have to pass 2 year diploma in education course or 1 year B.Ed course within time period of 5 years .

(d) No any document as caste certificate/resident certificate/ mark sheet/ degree certificate etc. is required for apply for this exam. You have to apply in just a single OMR sheet. Application form is available in only District Education Offices of Bihar. Don’t purchase any application from market.


Age Bar- As on 17.07.2011
General Male and Female – 37 years
OBC Male and Female – 40 years
EBC Male and Female – 40 years
SC/ST Male and Female – 42 years.
There are no any age relaxations for ex- service man or job experienced etc. Age relaxation is based on caste only.

Salary of recruited teacher would be based on pay scale as Assistant teacher.

Comments

  1. Please inform Exam Date of BTET 2011 For 6th to 8th.

    ReplyDelete
  2. Score card of BTET/STET is valid without BT/B.Ed

    ReplyDelete

Post a Comment

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca