Skip to main content

Crop production and Management Class 08 Book Science Mission Questions answer Part 03

Science mission class 8 solutions chapter 1 
Chapter 01 Crop production and Management Questions answer Part 03




B. Long answer type questions.

1. How and why did humans start practicing agriculture?

Ans: Man was basically a food gatherer. At times when the weather got rough, he and his family had to eat stale food or had to go without food. This made him to change his habit to domesticating animals and growing plants along his dwelling units. This was the beginning of farming by man.

2. How do we separate healthy seeds from a mixture of seeds?

Ans: Healthy seeds are separated from the mixture of seeds by following :

a. Manually by seeing the physical condition of the seed, damaged seeds are often broken or damaged in other ways.

B. by soaking them in water, damaged seeds are not able for germination process after soaking them.

3. What is intercropping? Name a few crops cultivated as intercrops.

Ans: Planting a leguminous crop in between two major crops in a field such as planting of Trifoliumin between Kharif and Rabi is called intercropping. This way, soil is enriched with nitrogenous nutrients for the next crop in addition to obtaining fodder for the farm animals rich in nutrients.

Intercropping is also a system of cropping where two or more crops are grown in proximity along ridges (as in mixed cropping).

Non-leguminous plant (such as one of Maize (corn), sorghum, millets, potato, cabbage, cauliflower, brinjal) and leguminous plant (such as one of pulses, beans including groundnut) are cultivated alternately as intercrops.

4. What is ‘Rotation of crops? How is it similar or dissimilar to intercropping?

After harvesting a cereal or vegetable crop farmer grow leguminous crop for one season (instead of growing and harvesting a regular crop) in the field . This is called the Rotation of Crops.

It is similar to inter cropping as legumes plants are grown in field to increase fertility of soil.

It is different from intercropping as one regular crop was replaced with a leguminous crop and the farmer had to go without a crop of grains or fruit/vegetable.

5. How do we save runaway water for irrigation purpose?

Ans: Runaway water may be saved by adopting water harvesting, digging wells on local scale or raising mud-dams to store water in lakes or ponds and its use by any method including canal irrigation.

6. Give the advantages and disadvantages of using chemical fertilizers for the cultivation of crop.

Ans: Fertilizers used for the cultivation of crop has helped farmers in getting better yield in comparison to the use of organic manure but the prolonged and excessive use of chemical fertilizers has resulted in leaving the soil less fertile in the long run, also it results in poisoning the groundwater.

7. Why should we make use of sprinklers or drip for irrigating crops instead of flood irrigation?

Ans: We make use of sprinklers or drip for irrigating crops instead of flood irrigation to save water.

Sprinkler system: This system is useful for sandy soil and uneven land where sufficient water is not available. Water is sprinkled similar to rain from the revolving nozzles on the crops.

Drip system: In this system, water comes out drop by drop near the roots of the plants. This technique minimizes the wastage of water due to evaporation. This technique is finest technique for watering, gardens, trees and fruit plants.

8. Why it is necessary to preserve and maintain water bodies?

Ans: Water bodies like lakes, wells, ponds and puddles are an evergreen source of soil water. It enriches greenery and also serves as a source of water for man and animals. Water bodies also saves soil from going sandy. Thus, it is necessary to preserve and maintain water bodies

9. What are the different ways in which a farmer draws groundwater for irrigation?

Ans: Traditional method of irrigation includes drawing of water from wells by different methods such as moat, chain pump, rahat or dhekli.

Nowadays, drawing groundwater through tube-well is being practiced. Tube wells are operated with the help of a motor run on electricity or diesel. With the lowering of the level of groundwater, the wells may not serve the purpose of irrigation and therefore, some other methods are being adopted.

10. How do leguminous crops help in increasing soil fertility?

Ans: Rhizobium bacteria present in the root nodules of leguminous plants. Rhizobium is capable of absorbing nitrogen and oxygen from the air and form nitrogen oxide. This nitrogen oxide enriches soil with nitrogenous mineral in a natural way.

We need not add fertilizer to the soil on which leguminous plants are growing. The roots of leguminous plants left behind in the soil continue to add nitrogen mineral to the soil.

11. Discuss the necessity of weeding. How this can be done?

Ans: Crop Plants require a good amount of mineral nutrition and water from the soil. Weeds are unwanted plants grow alongside the crop plants and share their nutrients and water. Thus, most weeds are harmful for the healthy growth of crop plants.

The removal of weeds from crop field is called weeding. Hence, weeding is essential to have better crop.

Weeding is done manually by the using trowel or with machine called seed drill or using chemicals called weedicide.

Weedicides are chemicals which are poisonous for the weeds but are not harmful for crop plants.

Weeding can also be done using biological control. Some worms and insects feed on certain weeds and help in destroying them.

12. What is Nitrogen fixation? List all the ways in which nitrogen fixation takes place in nature.

Ans: Fixation of nitrogen is the conversion of atmospheric nitrogen into compounds of nitrogen by certain microorganisms. 

(a) Rhizobium bacteria present in the root nodules of leguminous plants help in nitrogen fixation. They absorb nitrogen and oxygen from the air and combines the two to form nitrogen oxide. 

This nitrogen oxide used by plants to make plants protein(ammonia). The roots of leguminous plants left behind in the soil continue to add nitrogen mineral to the soil.

(b) Blue-green algae which is common found in paddy fields and other wet places are also capable of fixing air nitrogen into soil.

13. How biological control on weeds is practiced?

Ans: Some worms and insects have a special affinity to certain weeds with which they flourish well. They eat, kill and eliminate the weeds, without harming the crop plants. Such worms and insects are cultured to destroy weeds.

14. How do earthworms help the farmers?

Ans: Worms, especially the white or red worms and the earthworms, are a great friend of farmers. They feed on decaying organic matter and convert them into compost.

When the earthworms move through the soil they inadvertently dig canals and leave behind the soft and airy casts (vermicompost). Vermicompost is the best nutrient for a crop since the worms keep the manure warm and airy.

15. In what way white worms are more effective than earthworms?

Ans: Red and white worms are smaller in size to earthworms and they multiply fast to grow in large numbers. They  enrich the soil with vermicompost faster than the normal earthworms.

16. What are the aims and objectives of animal husbandry?

Ans: Rearing of animals on a large scale at home or on a farm, taking care of their shelter, proper food, health and breeding is called Animal husbandry.

The aims and objectives of animal husbandry are Animal husbandry is the science of taking care of the domestic animals regarding:

(a) Provide fresh water and clean shelter to animals

(b) Provide nutritional food

(c) Proper facility for Breeding and multiplication of animals.

(d) proper care of health and protection against disease

Crop production and Management Class 08 Book Science Mission Questions answer Part 01

Crop production and Management Questions answer Class 08 Book Science Mission Part 02

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca