Skip to main content

Chapter 8 How Do Organisms Reproduce [STUDY MATERIAL FOR 10th class SLOW LEARNERS]


One mark question
Q1. Name the type of fission carried out by amoeba.       

Ans.  Binary fission.
Q2.  What is vegetative propagation?

Ans. When new plants are grown by using vegetative parts like root, stem and leaves it is known as vegetative propagation.

Q3. Name an organism which reproduces by multiple fission.

Ans. Plasmodium {malarial parasite}

Q4. What is Puberty?

Ans. The age at which the human males and females becomes sexually mature is called puberty.

Q5. What is pollination?

Ans. The transfer of pollen grains from anther to the stigma of the same or another flower of the same kind is called pollination.

Q6. What is fertilization?

Ans. The fusion of male and female gametes is called fertilization.

Q7. What is placenta?

Ans. The tissue connecting developing embryo {foetus} and mother is called placenta.

Q8. What is asexual reproduction?

Ans. The process of reproduction in which only one parent is involved and no sex cells are involved 
is called asexual reproduction.

Q9. Write the expanded form of AIDS.

Ans. Acquired Immuno deficiency Syndrome is the full form of AIDS.

Q10. Name two sexually transmitted diseases.

Ans. 1.AIDS.    2. Gonorrhea. 3. Syphilis

Two mark question

Q1.Name those parts of the flower which serve the same function as the following do in the animals:

1. Testes.     2.  Ovary.    
 3.  Eggs.      4.  Sperms

Ans.1.Stamen.      2. Carpel
        3. Ovule.        4. Pollen grain

Q2. What methods will you use for growing jasmine and rose plant?

Ans. Layering method of artificial vegetative propagation can be used for growing jasmine plant. 
Stem cutting method can be used for growing rose plant.

Q3.Mention any two functions of human ovary.

Ans.1.It produces ovum the female gamete.

2. It secretes hormone estrogen.

Q4. Define menstruation.

Ans. The breakdown and removal of the inner thick and soft lining of the uterus along with its blood  vessels in the form of vaginal bleeding is called menstruation.

Q5. How the surgery methods are misused by people to prevent pregnancy?

Ans. Surgery methods are misused to prevent pregnancy. This method can be used for removal of unwanted pregnancies by people who do not want a particular child which happens in case of illegal sex selective abortion of female foetus.

Q6. What is the significance of human testes being located in the scrotum?

Ans. Scrotum protects the testes by regulating the temperature of the testes. Sperms need a temperature less than the body temperature for their production and development.

Q7. Questions: Name those parts of a flower which serve the same function as the following do in the animal       
(i) Testis (ii) Ovary (iii) Eggs (iv) Sperms

Ans:
Testis as anther
Ovary ovules present inside ovary
Eggs as eggs
Sperms as pollen grains

Q.8 Pre - natal sex determination has been prohibited by law. State two reasons.

Ans: Prenatal sex determination has been prohibited by law because of indiscriminate female foeticide. As a result of this, child sex ratio is declining at an alarming rate in some sections of our society. For a healthy society, the female-male sex ratio must be maintained.

Q.9. What is placenta ? State its any two roles during pregnancy.

Ans: The placenta is an organ that connects the developing fetus to the uterine wall to allow nutrient uptake, waste elimination, and gas exchange via the mother’s blood supply. "True" placentas are a defining characteristic of eutherian or "placental" mammals, but are also found in some snakes and lizards with varying levels of development up to mammalian levels.the following are the roles :-
(a) For nine months the placenta feeds and nourishes the fetus while also disposing of toxic waste.
(b) Without it the baby could not survive. After your baby is born, the placenta no longer serves a function.

Q10. Small piece of root tissue was taken from the rose plant and placed in a nutrient medium. Each root tissue produced a new rose plant. Name the reproductive process involved. What type of genes will be possessed by new rose plant ?

Sol. (i) This process is called tissue culture.

(ii) Genes possessed by the new plant is same as that of the parent plant.

Three marks question

Q1. (a). What is fertilization? Distinguish between external fertilization and internal fertilization.

  (b). What is the site of fertilization in human beings?

Ans.(a)  Fertilization is defined as the fusion of male and female gametes to form a zygote during a 
sexual reproduction.

 Difference between external and Internal fertilization

External fertilization
Internal fertilization
1. The fusion of male and female gametes 
occurs outside the body.
1. The fusion of gametes occurs inside the body.

2. Both individual discharge their gametes 
outside the body and development occurs 
outside the body.
2. The gametes fuse inside the female body and 
development occurs inside the body.
Example: Frogs 
Example: Birds, cattle, humans

(b)  The site of fertilization in human beings is in the fallopian tube of female reproductive system.

Q2. Give two advantages of vegetative propagation.

Ans. 1(i). Vegetative propagation is a cheaper, easier and more rapid method of propagation in plants 
than growing plants from seeds.

(ii). The characteristics of the parent plant are preserved by vegetative propagation.

Q3. Describe the surgical methods of birth control. 

Ans. The surgical method can be done in males as well as in females.

In case of males the vas deference is blocked and sperm transfer is prevented. In case of females the 
fallopian tube is blocked the egg will not be able to reach the uterus. These are permanent methods of  birth control.

Q4. Why is DNA copying an essential part of the process of reproduction?

Ans. DNA copying is an essential part of the process of reproduction because-

  1. DNA provides cellular apparatus in the daughter cells.
  2. DNA in the daughter cells will control their functioning
  3. DNA copies will retain the characters.

Q5. What could be the reasons for the adopting of contraceptive methods?

Ans. Contraceptive methods are adopted for the following reasons:
1.      For preventing unwanted pregnancies and keeping the health of women.
2.      2. To prevent the transmission of fatal diseases mechanical barrier methods are used.

Q.6. Mention any three advantages of variation in individuals.

Ans:
(i) Variation helps in survival of species.
(ii) It is the basis of evolution.
(iii) It brings adaptation in individuals.

Q.7. Name the filamentous structure seen in pond. Explain how do they reproduce.

Ans:  Spirogyra have filamentous structure. They reproduce by the process of fragmentation in which they break up into smaller pieces upon maturation. These pieces grow into new individuals.

Q.8. A student noticed that an organism by mistake was cut in two parts.  After sometime both the parts developed into new individuals.
(a) Name the mode of reproduction used by the organism.
(b) State the type of cells which carry this process.
(c) Write examples of two organisms which multiply by this process.

Ans:
(a) Regeneration (asexual reproduction)
(b) Specialised cells.
(c) Hydra and Planaria

Q9. Ravi took three bread slices and kept the three pieces of the slices  in the following conditions.
(i) Slice 1 in a dried and dark place.
(ii) Slice 2 in a moist and dark place.
(iii) Slice 3 in moist and in refrigerator.

What would he observe in each of the above conditions ? Give reasons for your answer ?

Ans:
(i) In Slice 1, No spore will develop due to lack of  moisture.
(ii) A white cottony mass surrounded with a black mass is seen spreading on the surface of slice 2 due to formation of sporangia and spores as moisture and darkness provide favourable condition.
(iii) In slice 3, no spore will be formed as it is kept at a lower temperature in the refrigerator, which is not a favourable condition.

Q10. (i) State the function of (a) stigma (b) pollen tube.  (ii) What happens to the ovule after fertilization ?

Ans: .
(i) (a) Stigma receives pollens.
    (b) Pollen tube helps to carry the male germ cell to the female germ cell from the stigma to the ovary.

(ii) After fertilization, the ovule develops into seed.

Links For CBSE Class X Science Term-II




Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca