Skip to main content

General Science Quiz Questions & Answers


1. Why does a rider feel a tendency to fall when the horse starts running of stops suddenly?
Ans: This is caused by inertia. When the horse starts running, the rider, being at rest, falls back. When a running horse stops suddenly, the rider being in motion has a tendency to fall ahead.

2. Why does a person carrying a bucket full of water in his right hand bend towards the left?
Ans: He bends towards his left so that the centre of gravity falls within the base. This enables him to keep up balance, otherwise he may fall.

3. Why does tea cool more rapidly in a saucer than in a cup?
Ans: In a saucer evaporation takes place more rapidly than in a cup. Cooling is caused by evaporation.

4. Ice packed in sawdust does not melt quickly. Why?
Ans: Ice packed in sawdust does not melt quickly, because sawdust being bad conductor, it cuts the heat rays.

5. Why do you heat a metal rim before fitting it to a wheel?
Ans: By heating, the rim expands and fits easily over a slightly bigger radius than that of the rim. On being cooled it contracts and has a firm grip on the wheel.

6. Why do wet clothes dry slowly on a rainy day?
Ans: On a rainy day the atmosphere air contains more water vapor than on a dry day and hence evaporation is slower.

7. Why does a substance thrown up come to the ground?
Ans: Because of the gravitational force of the earth.

8. Why does moisture gather outside of a glass of cold water on a warm day?
Ans: The temperature of the outer surface of glass of cold water is lower than that of its surroundings. The vapor in the surrounding atmosphere gets condensed on the outer surface of the water appears in the forms of tiny particles of water.

9. What happens to iron when it rusts?
Ans: It reacts with the oxygen of the air and forms iron-oxide which is the rust.

10. How would you distinguish between welding and soldering?
Ans: Welding is the joining of metals by raising the temperature of the metals to fuse them together by melting their ends. Soldering is the joining of metals with the help of an alloy called solder.

11. How does a ball which falls down, bounce up?
It is due to the operation of Newton’s Third Law of motion. To every action there is equal and opposite reaction. A ball falling to the ground is slightly deformed. Due to the elastic force of the material of which the ball is made, the ball tries to recover its original shape. In doing so it forces the ground which pushes the ball upward due to reaction and the ball bounces up.

12. An iron nail floats on mercury but sinks in water. Give reasons.
Ans: The specific density of iron is lower than of mercury, hence it floats on mercury, while it is higher than that of water, and hence it sinks in water.

13. How do you convert Centigrade in to Fahrenheit?
Ans: With the help of the following formula – C/100 = F-32/180

14. It is advisable to work electric appliances when they are earthed suitably. Why?
Ans: In case of short-circuiting, the current passes to the earth without harming the user, if an electrical appliance is properly earthed.

15. How does a refrigerator keep food fresh?
Ans: Food is kept fresh so long as fermentation does not set in; refrigeration prevents fermentation by providing low temperature.

16. Ice wrapped in a blanket does not melt away quickly. Why?
Ans: Blanket being bad conductor of heat prevents the outside heat from creeping inside.

17. Why can a petrol fire not be extinguished by throwing water on it?
Ans: The heat of the petrol fire is so intense that the water thrown on it gets evaporated and decomposed. Hence it is not effective in extinguishing the petrol fire.

18. A train stops when the chain is pulled. Why?
Ans: When the chain is pulled, one small valve gets opened and air/atmospheric pressure is admitted to the under side of the piston head of the brake cylinder through pipe connection. Initially there is vacuum on both top and bottom side of the piston head. When the air/atmospheric pressure enters the under side of the piston head, the piston raises up due to difference of pressure and pulls the brake rigging to which it is connected with links and levers. Thus the brakes are applied and the train stops.
Courtesy: Articlediary.com

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get d...

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 ...

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page ...

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca...