Skip to main content

ctet :Classroom discipline and management

CBSE ADDA Classroom discipline and management causes the most fear and consternation in new teachers. However, classroom management is a skill that is not only learned but practiced daily. Here are ten tips that can lead to successful classroom management and discipline. These tips can help you cut down on discipline problems and leave you with fewer interruptions and disruptions.

Here’s How:
Begin each class period with a positive attitude and high expectations. If you expect your students to misbehave or you approach them negatively, you will get misbehavior. This is an often overlooked aspect of classroom management.
Come to class prepared with lessons for the day. In fact, overplan with your lessons. Make sure to have all your materials and methods ready to go.Reducing downtime will help maintain discipline in your classroom.
Work on making transitions between parts of lessons smooth. In other words, as you move from whole group discussion to independent work, try to minimize the disruption to the class. Have your papers ready to go or your assignment already written on the board. Many disruptions occur during transitional times during lessons.
Watch your students as they come into class. Look for signs of possible problems before class even begins. For example, if you notice a heated discussion or problem before class starts, try to deal with the problem then. Allow the students a few moments to talk with you or with each other before you start your lesson to try and work things out. Separate them if necessary and try to gain agreement that during your class period at least they will drop whatever issue they have.
Have a posted discipline plan that you follow consistently for effective classroom management. Depending on the severity of the offense, this should allow students a warning or two before punishment begins. Your plan should be easy to follow and also should cause a minimum of disruption in your class. For example, your discipline plan might be – First Offense: Verbal Warning, Second Offense: Detention with teacher, Third Offense: Referral.
Meet disruptions that arise in your class with in kind measures. In other words, don’t elevate disruptions above their current level. Your discipline plan should provide for this, however, sometimes your own personal issues can get in the way. For example, if two students are talking in the back of the room and your first step in the plan is to give your students a verbal warning, don’t stop your instruction to begin yelling at the students. Instead, have a set policy that simply saying a student’s name is enough of a clue for them to get back on task. Another technique is to ask one of them a question.
Try to use humor to diffuse situations before things get out of hand. Note: Know your students. The following example would be used with students you know would not elevate the situation to another level. For example, if you tell your students to open their books to page 51 and three students are busy talking, do not immediately yell at them. Instead, smile, say their names, and ask them kindly if they could please wait until later to finish their conversation because you would really like to hear how it ends and you have to get this class finished. This will probably get a few laughs but also get your point across.
If a student becomes verbally confrontational with you, remain calm and remove them from the situation as quickly as possible. Do not get into yelling matches with your students. There will always be a winner and a loser which sets up a power struggle that could continue throughout the year. Further, do not bring the rest of the class into the situation by involving them in the discipline or the writing of the referral. More on dealing with confrontational students in your classroom.
If a student becomes physical, remember the safety of the other students is paramount. Remain as calm as possible; your demeanor can sometimes diffuse the situation. You should have a plan for dealing with violence that you discussed with students early in the year. You should use the call button for assistance. You could also have a student designated to get help from another teacher. Send the other students from the room if it appears they could get hurt. If the fight is between two students, follow your school’s rules concerning teacher involvement as many want teachers to stay out of fights until help arrives.
Keep an anecdotal record of major issues that arise in your class. This might be necessary if you are asked for a history of classroom disruptions or other documentation.
Let it go at the end of the day. Classroom management and disruption issues should be left in class so that you can have some down time to recharge before coming back to another day of teaching.

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca