Skip to main content

Gravitation



Gravitation is a natural phenomenon by which objects with mass attract one another. 

In everyday life, gravitation is most commonly thought of as the agency which lends weight to objects with mass. Gravitation compels dispersed matter to coalesce, thus it accounts for the very existence of the Earth, the Sun, and most of the macroscopic objects in the universe. It is responsible for keeping the Earth and the other planets in their orbits around the Sun; for keeping the Moon in its orbit around the Earth, for the formation of tides; for convection (by which fluid flow occurs under the influence of a temperature gradient and gravity); for heating the interiors of forming stars and planets to very high temperatures; and for various other phenomena that we observe. Modern physics describes gravitation using the general theory of relativity, in which gravitation is a consequence of the curvature of space time which governs the motion of inertial objects.
UNIVERSAL LAW OF GRAVITATION

Every object in the universe attracts every other object with a force which is proportional to the product of their masses and inversely proportional to the square of the distance between them. The force is along the line joining the centres of two objects.
law of gravitation

The gravitational force between two uniform objects is directed along the line joining their centres.

law of gravitation

Let two objects A and B of masses M and m lie at a distance d from each other. Let the force of attraction between two objects be F.

According to the universal law of gravitation, the force between two objects is directly proportional to the product of their masses.

That is,  Fa M x m

And the force between two objects is inversely proportional to the square of the distance between them, that is,
law of gravitation

Combining the Eqs. we get

law of gravitation
law of gravitation

Where G is the constant of proportionality and is called the universal gravitation constant. By multiplying crosswise, Eq. gives

F × d2 = G M × m

law of gravitation

The SI unit of G can be obtained by substituting the units of force, distance and mass in Eq. as N m2 kg–2.


The value of G was found out by Henry Cavendish (1731 – 1810) by using a sensitive balance. The accepted value of G is 6.673 × 10–11N m2 kg–2.

Example:
The mass of the earth is 6 × 1024 kg and that of the moon is 7.4 × 1022 kg. If the distance between the earth and the moon is 3.84×105 km, calculate the force exerted by the earth on the moon. G = 6.7 × 10–11 N m2 kg-2

Solution:
The mass of the earth, M = 6 × 1024 kg
The mass of the moon,
m = 7.4 × 1022 kg
The distance between the earth and the moon,
d = 3.84 × 105 km
= 3.84 × 105 × 1000 m
= 3.84 × 108 m
G = 6.7 × 10–11 N m2 kg–2
From Eq. the force exerted by the earth on the moon is
law of gravitation
law of gravitation

= 2.01 × 1020 N
Thus, the force exerted by the earth on the moon is 2.01 × 1020 N.


IMPORTANCE OF THE UNIVERSAL LAW OF GRAVITATION
The universal law of gravitation successfully explained several phenomena which were believed to be unconnected:


(i) the force that binds us to the earth;

(ii) the motion of the moon around the earth;
(iii) the motion of planets around the Sun; and
(iv) the tides due to the moon and the Sun.

TO CALCULATE THE VALUE OF g

To calculate the value of g, we should put the values of G, M and R in Eq. namely, universal gravitational constant, G = 6.7 × 10–11 N m2 kg-2, mass of the earth, M = 6 × 1024 kg, and radius of the earth, R = 6.4 × 106 m.

law of gravitation
law of gravitation






= 9.8 ms-2
Thus, the value of acceleration due to gravity of the earth,  g= 9.8 ms-2

MOTION OF OBJECTS UNDER THE INFLUENCE OF GRAVITATIONAL FORCE OF THE EARTH

We know that an object experiences acceleration during free fall. From Eq. this acceleration experienced by an object is independent of its mass. This means that all objects hollow or solid, big or small, should fall at the same rate. According to a story, Galileo dropped different objects from the top of the Leaning Tower of Pisa in Italy to prove the same.

As g is constant near the earth, all the equations for the uniformly accelerated motion of objects become valid with acceleration a replaced by g
The equations are:
v = u + at
S= ut + ½ at2
v2 = u2 + 2as
Where u and v are the initial and final velocities and s is the distance covered in time, t.

In applying these equations, we will take acceleration, a to be positive when it is in the direction of the velocity, that is, in the direction of motion. The acceleration, a will be taken as negative when it opposes the motion.

Example:
A car falls off a ledge and drops to the ground in 0.5 s. Let g = 10 m s–2 (for simplifying the calculations).
(i) What is its speed on striking the ground?
(ii) What is its average speed during the 0.5 s?
(iii) How high is the ledge from the ground?
Solution:
Time, t = ½ second
Initial velocity, u = 0 m s–1
Acceleration due to gravity, g = 10 m s–2
Acceleration of the car, a = + 10 m s–2
(i) speed v = a t
v = 10 m s–2 × 0.5 s
= 5 m s–1
(ii) average speed
average speed
= (0 m s–1+ 5 m s–1)/2
= 2.5 m s–1
(iii) distance traveled, s = ½ a t2
= ½ × 10 m s–2 × (0.5 s) 2
= ½ × 10 m s–2 × 0.25 s2
= 1.25 m
Thus,
(i) Its speed on striking the ground = 5 m s–1
(ii) Its average speed during the 0.5 s = 2.5 m s–1
(iii) Height of the ledge from the ground = 1.25 m.

Example:
An object is thrown vertically upwards and rises to a height of 10 m. 
Calculate (i) the velocity with which the object was thrown upwards and (ii) the time taken by the object to reach the highest point.

Solution:
Distance traveled, s = 10 m
Final velocity, v = 0 m s–1
Acceleration due to gravity, g = 9.8 m s–2
Acceleration of the object, a = –9.8 m s–2
(i) v2 = u2 + 2a s
0 = u2 + 2 × (–9.8 m s–2) × 10 m
–u2 = –2 × 9.8 × 10 m2 s–2
u = root 196 m s-1
u = 14 m s-1
(ii) v = u + a t
0 = 14 m s–1 – 9.8 m s–2 × t
t = 1.43 s.
Thus,
(i) Initial velocity, u = 14 m s–1, and
(ii) Time taken, t = 1.43 s.

Mass:- mass refers to the degree of acceleration a body acquires when subject to a force: bodies with greater mass are accelerated less by the same force.

Weight:- Weight is the force of gravity acting on a mass. Weight should be measured in Newtons and has a direction component (vector). This direction is normally downward due to gravity.

We know that the earth attracts every object with a certain force and this force depends on the mass (m) of the object and the acceleration due to the gravity (g). The weight of an object is the force with which it is attracted towards the earth.

We know that
F = m × a,
that is,
F = m × g.

The force of attraction of the earth on an object is known as the weight of the object. It is denoted by W.
W = m × g

WEIGHT OF AN OBJECT ON THE MOON
The weight of an object on the earth is the force with which the earth attracts the object. In the same way, the weight of an object on the moon is the force with which the moon attracts that object. The mass of the moon is less than that of the earth. Due to this the moon exerts lesser force of attraction on objects.
Let the mass of an object be m. Let its weight on the moon be Wm. Let the mass of the moon be Mm and its radius be Rm. 

By applying the universal law of gravitation, the weight of the object on the moon will be


weight

Let the weight of the same object on the earth be We. The mass of the earth is M and its radius is R.
From Eqs. and we have,

weight

Substituting the values, we get

weight


Wm = 2.431 ×1010G x m

and We=1.474 × 1011 G × m

Dividing Eq., we get


weight

Or, Weight of the Object on Moon/Weight of the Object on Earth = 1/6

Weight of the object on the moon = (1/6) × its weight on the earth

Example:
Mass of an object is 10 kg. What is its weight on the earth?
Solution:
Mass, m = 10 kg
Acceleration due to gravity, g = 9.8 m s–2
W = m × g
W = 10 kg × 9.8 m s-2 = 98 N
Thus, the weight of the object is 98 N.

Example:
An object weighs 10 N when measured on the surface of the earth. What would be its weight when measured on the surface of the moon?

Solution:
We know, Weight of object on the moon = (1/6) × its weight on the earth.
That is,
weight
Thus, the weight of object on the surface of the moon would be 1.67 N.

Thrust and Pressure

Thurst: Thrust is a reaction force described quantitatively by Newton's Second and Third Laws. When a system expels or accelerates mass in one direction the accelerated mass will cause a proportional but opposite force on that system.

Pressure: Pressure (symbol: p or sometimes P) is the force per unit area applied to an object in a direction perpendicular to the surface. Gauge pressure is the pressure relative to the local atmospheric or ambient pressure.

pressure

The SI unit of pressure is N/m2 or N m–2.

Example:
A block of wood is kept on a tabletop. The mass of wooden block is 5 kg and its dimensions are 40 cm × 20 cm × 10 cm. Find the pressure exerted by the wooden block on the table top if it is made to lie on the table top with its sides of dimensions (a) 20 cm × 10 cm and (b) 40 cm × 20 cm.

Solution:
The mass of the wooden block = 5 kg
The dimensions = 40 cm × 20 cm × 10 cm
Here, the weight of the wooden block applies a thrust on the table top.
That is,
Thrust = F = m × g   = 5 kg × 9.8 m s–2         = 49 N

Area of a side = length × breadth = 20 cm × 10 cm = 200 cm2 = 0.02 m2

From Eq.
Pressure = 49/0.02 m2 = 2450 Nm-2

When the block lies on its side of dimensions 40 cm × 20 cm, it exerts the same thrust.

Area= length × breadth = 40 cm × 20 cm = 800 cm2 = 0.08 m2


Or, Pressure = 49/0.08 m2 = 612.5 Nm-2

The pressure exerted by the side 20 cm × 10 cm is 2450 N m–2
and by the side 40 cm × 20 cm is 612.5 N m–2.

PRESSURE IN FLUIDS

All liquids and gases are fluids. A solid exerts pressure on a surface due to its weight. Similarly, fluids have weight, and they also exert pressure on the base and walls of the container in which they are enclosed. Pressure exerted in any confined mass of fluid is transmitted undiminished in all directions.

WHY OBJECTS FLOAT OR SINK WHEN PLACED ON THE SURFACE OF WATER?


The nail sinks. The force due to the gravitational attraction of the earth on the iron nail pulls it downwards. There is an up thrust of water on the nail, which pushes it upwards. But the downward force acting on the nail is greater than the up thrust of water on the nail. So it sinks.

The cork floats while the nail sinks. This happens because of the difference in their densities. The density of a substance is defined as the mass per unit volume. The density of cork is less than the density of water. This means that the up thrust of water on the cork is greater than the weight of the cork. So it floats.

The density of an iron nail is more than the density of water. This means that the up thrust of water on the iron nail is less than the weight of the nail. So it sinks.

Therefore, objects of density less than that of a liquid float on the liquid. The objects of density greater than that of a liquid sink in the liquid.

Archimedes’ Principle

Archimedes' principle, states that a body immersed in a fluid is buoyed up by a force equal to the weight of the displaced fluid. The principle applies to both floating and submerged bodies and to all fluids, i.e., liquids and gases. 

It explains not only the buoyancy of ships and other vessels in water but also the rise of a balloon in the air and the apparent loss of weight of objects underwater. 


In determining whether a given body will float in a given fluid, both weight and volume must be considered; that is, the relative density, or weight per unit of volume, of the body compared to the fluid determines the buoyant force.


If the body is less dense than the fluid, it will float or, in the case of a balloon, it will rise. If the body is denser than the fluid, it will sink. 


Relative density also determines the proportion of a floating body that will be submerged in a fluid. If the body is two thirds as dense as the fluid, then two thirds of its volume will be submerged, displacing in the process a volume of fluid whose weight is equal to the entire weight of the body. In the case of a submerged body, the apparent weight of the body is equal to its weight in air less the weight of an equal volume of fluid.


archimedes

Example:
Relative density of silver is 10.8. The density of water is 103 kg m–3. What is the density of silver in SI unit?
Solution:
Relative density of silver = 10.8
Relative density = Density of Silver/Density of Water

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca