Skip to main content

Class IX 1st. Term Science Syllabus Practicals and Theory

Class IX 1st.  Term Science Syllabus
April :
Unit : Matter in our surroundings
Unit : Matter –Is matter around us pure
Unit:  Improvement in Food Resources
May:
Unit : The fundamental unit of life
Unit : Tissues
July:
Unit : Motion
Unit : Force and laws of motion
August:
Unit : Gravitation
September : Revision of the I term Syllabus and I term examinations
PRACTICALS Class IX 1st.  Term Science
Practical are to be conducted alongside the concepts taught in theory classes.
List of Experiments
1. To test (a) the presence of starch in the given food sample (b) the presence of the adulterant metanil yellow in dal.
2. To prepare
a) a true solution of common salt, sugar and alum
b) a suspension of soil, chalk powder and fine sand in water
c) a colloidal of starch in water and egg albumin in water and distinguish between these on the basis of
1.       transparency
2.       filtration criterion
3.       stability
3. To prepare   a) a mixture     b) a compound  using iron filings and sulphur powder and distinguish between these on the basis of:
i. appearance i.e., homogeneity and heterogeneity
ii. behaviour towards a magnet
iii. behaviour towards carbon disulphide as a solvent.
iv. effect of heat.
4. To carry out the following reactions and classify them as physical or chemical changes.
a. Iron with copper sulphate solution in water.
b. Burning of magnesium in air.
c. Zinc with dilute sulphuric acid
d. Heating of copper sulphate
e. Sodium sulphate with barium chloride in the form of their solutions in water.
5. To prepare stained temporary mounts of (a) onion peel and (b) human cheek cells and to record observations  and draw their labeled diagrams.
6. To identify parenchyma and sclerenchyma tissues in plants, striped muscle fibers and nerve cells in animals, from prepared slides and to draw their labeled diagrams.
7. To separate the components of a mixture of sand, common salt and ammonium chloride (or camphor) by sublimation.
8. To determine the melting point of ice and the boiling point of water.
9. To establish relationship between weight of a rectangular wooden block lying on a horizontal table and the minimum force required to just move it using a spring balance.
10. To determine the mass percentage of water imbibed by raisins.
Class IX 2nd.  Term Science Syllabus
October:
Unit : Atoms and molecules
Unit : Structure of the atom
November:
Unit : Diversity in living organisms
Unit : Why do we fall ill
December:
Unit : Thrust and pressure
Unit : Work, Power & Energy
Unit : Sound
January :
Unit : Natural Resources
February : Revision of II term Syllabus
PRACTICALS SECOND TERM
Practical are to be conducted alongside the concepts taught in theory classes.
1. To verify laws of reflection of sound.
2. To determine the density of solid (denser than water) by using a spring balance and a measuring cylinder.
3. To establish the relation between the loss in weight of a solid when fully immersed in
a. tap water
b. strongly salty water, with the weight of water displaced by it by taking at least two different solids.
4. To observe and compare the pressure exerted by a solid iron cuboid on fine sand/ wheat flour while resting on its three different faces and to calculate the pressure exerted in the three different cases.
5. To determine the velocity of a pulse propagated through a stretched string/slinky.
6. To study the characteristic of spirogyra/Agaricus, Moss/Fern, Pinus ( either with male or female cone) and an Angiosperm plant. Draw and give two identifying features of groups they belong to.
7. To observe and draw the given specimens-earthworm, cockroach, bony fish and bird. For each specimen record
a. one specific feature of its phylum.
b. one adaptive feature with reference to its habitat.
8. To verify the law of conservation of mass in a chemical reaction.
9. To study the external features of root, stem, leaf and flower of monocot and dicot plants.
10. To study the life cycle of mosquito.
Download CBSE Paper:
9th science lab practical sample paper-1                    Download File
9th science lab practical sample paper-2                    Download File
9th science lab practical sample paper-3                    Download File

Comments

  1. i want the aim and procedures etc. as i lost my book .

    ReplyDelete

Post a Comment

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca