Skip to main content

Class viii metals and non metals Notes

1) Occurrence of metals and non metals :-
•Out of the 92 naturally occuringelements 70 are metals and about 22 are nonmetals. Some elements show properties of both metals and non metals. They are called metalloids.
•Only some metals like gold, silver, platinum etc are found in the free state. Most metals are found in the combined states as oxides, sulphides, carbonates, silicates etc.
Some non metals are found in the free state like helium, neon, argon etc. and some are found in free and combined states like sulphur, phosphorus etc.
2) Metallurgy :-
•Metallurgy:-is science of extraction of metals from their ores and their purification.
•Minerals:-are naturally occuringsubstances containing one or more elements or their compounds.
•Ore:-is a mineral from which one or more metals can be extracted profitably.
•Metallurgical processes:-consists of three main steps. They are :-i) Concentration of the ore ii) Reduction iii) Refining
•Concentration of the ore:-is the removal of impurities from the ore.
•Reduction:-the process of obtaining the metal from its compound.
Refining:-is the process of purification of the impure metals to obtain the pure metal.
3) Physical properties of metals and non metals:-
•Metals
•Metals are solids (except mercury).
•Metals are hard (except sodium, potassium etc.
•Metals have metallic lustre.
•Metals have high melting points and bolilingpoints.
•Metals are malleable ( can be made into thin sheets).
•Metals are ductile (can be made into thin wires).
•Metals are good conductors of heat and electricity.
•Metals are sonorus(produces sound).

•Non metals
•Non metals may be solids, liquids or gases.
•Non metals which are solids are brittle (diamond is the hardest).
•Non metals do not have lustresome have a dull luster.
•Non metals have low melting points.
•Non metals are not malleable.
•Non metals are not ductile.
•Non metals are bad conductors of heat and electricity (except graphite).
Non metals are not sonorous
4) Chemical properties of metals and non metals:-
a) Reaction with oxygen:-
Metals react with oxygen to form metallic oxides. These oxides are  basic oxides because they react with water to form bases. Eg. Magnesium burns in air to form magnesium oxide. Magnesium  reacts with water to form magnesium hydroxide.
2 Mg + O2--à2 MgO
MgO+ H2O-à  Mg(OH)2
Non metals react with oxygen to form non metallic oxides. These  oxides are acidic oxides because they react with water to form  acids.
Eg. Sulphurburns in air to form sulphurdioxide. Sulphurdioxide  reacts with water to form sulphurousacid.
S + O2-àSO2
SO2+ H2O---à H2SO3
b) Reaction with water:-
Metals react with water to form metal hydroxides and hydrogen.
Eg. Sodium reacts with water to form sodium hydroxide and  hydrogen.
2 Na + 2 H2O 2 Na OH + H2
Magnesium reacts with water to form magnesium hydroxide and hydrogen.
Mg + H2O Mg(OH)2+ H2
Non metals do not react with water.
c) REACTION WITH ACIDS:-
Metals react with acids to form metallic salts and hydrogen.
 Eg. Zinc reacts with dilute hydrochloric acid to form zinc chloride  and hydrogen.
Zn + 2 HCl ---------------àZnCl2+ H2
Most non metals do not react with acids.
Some non metals like sulphur reacts with concentrated nitric acid to forn sulphur dioxide, nitrogen dioxide and water.
S + 4 HNO3       -----------à SO2+ 4 NO2+2 H2O
d) Metals replace metals:-
A more reactive metal replaces a less reactive metal from its salt  solution.
Eg. Magnesium replaces copper from copper sulphate solution to form magnesium sulphate and copper.
Mg + CuSO4----------------à MgSO4+ Cu
Zinc replaces copper from copper sulphate solution to for zinc sulphate and copper.
Zn + CuSO4------------------à ZnSO4 + Cu
Iron replaces copper from copper sulphate solution to form iron sulphate and copper
Fe + CuSO4----------à FeSO4+ Cu
Based on the reactivity of metals, they can be arranged in the decreasing order of their activity.
5) Activity series of metals :-
The arranging of metals in the decreasing order of their reactivity is called activity series of metals.
In decreasindg order
Potassium
Sodium
Magnesium
Aluminium Decreasing
Zinc order of
Iron reactivity
Lead
Copper
Silver
Gold
6) Noble metals :-
Metals like gold, silver, platinum etc. retain their lustre because they do not react with air, water or acids. So they are called noble metals.
Gold dissolves in aqua regia. Aqua regia is a mixture of concentrated nitric acid and concentrated hydrochloric acid in the ratio 1:3.
Pure is 24 carat gold. It is very soft and cannot be used for making ornaments. So it is mixed with some silver or copper to make it hard.
7) Uses of metals :-
Iron :-is used for making pins, nails, nuts, bolts, tools,
machines, construction of buildings, bridges etc.
Aluminium :-is used for making utensils, wires, furniture,  parts of aircrafts, vehicles, machines, for packing food and medicines etc.
Copper :-is used for making wires, vessels, electric  gadgets etc.
Gold :-is used for making jewellery, coins medals etc
Silver :-is used for making jewellery. Coins, medals etc.
Platinum :-is used for making jewellery, electric gadgets, plugs in vehicles etc.
Sodium :-compounds are used as common salt,  chemicals etc.
Calcium :-compounds are used for making cement, glass etc.
8) Uses of non metals:-
Sulphur:-is used for making sulphuric acid, salts of  metals etc.
Oxygen:-is used for respiration by living things, burning  of fuels etc.
Nitrogen:-is used for making ammonia which is used for  making fertilizers.
Hydrogen:-is used for making ammonia which is used for making fertilizers, as fuel in rockets, for welding etc.
Chlorine:-is used to kill germs in water.
Iodine:-is used as tincture iodine which is an antiseptic
10) Corrosion:-
The surface of some metals gets corroded when exposed  to moist air for a long time. This is called corrosion.
Prevention of corrosion of metals:-
The corrosion of metals can be prevented by:-
i) Applying oil or grease.
ii) Applying paint
iii) Galvanisation ( coating of metals with non corrosive metals like zinc)
iv) Electroplating ( coating of metals with non corrosive metals like chromium tin by passing
electricity)
v) Alloying ( Eg. When iron is alloyed with chromium and nickel, it forms stainless steel which is resistant to corrosion) 
Source : CHEMISTRY ADDA

Comments

CBSE ADDA :By Jsunil Sir : Your Ultimate Destination for CBSE Exam Preparation and Academic Insights

Class 10 Chapter 02 Acid Bases and Salts NCERT Activity Explanation

NCERT Activity Chapter 02 Acid Bases and Salt Class 10 Chemistry Activity 2.1 Indicator Acid Base Red litmus No Change Blue Blue Litmus Red No change Phenolphthalein Colourless Pink Methyl Orange Pink   Yellow Indictors are substance which change colour in acidic or basic media. Activity 2.2 There are some substances whose odour changes in in acidic or basic media. These are called olfactory indicators. Like onion vanilla, onion and clove. These changes smell in basic solution. Activity 2.3 Take about 5 mL of dilute sulphuric acid in a test tube and add few pieces of zinc granules to it. => You will observe bubbles of hydrogen gas on the surface of zinc granules. Zn + H2SO4 --> ZnSO4 + H2 => Pass the Hydrogen gas through the soap solution. Bubbles formed in the soap solution as Hydrogen gas it does not get dissolved in it

Living science ratna sagar class 6 solutions

Ratna sagar living science 6 answers by jsunil. Class6 Living science solution Term-1 Living Science Solution chapter-1 Source of food Download File Living Science Solution chapter-2 Component of food Download File Living Science Solution chapter-3 Fibre to fabric Download File Living Science Sol ch-4 Sorting of material into group Download File Living Science Soln ch-5 Separation of substance Download File Living Science Solution chapter-6 Change around Us Download File Living Science Solution ch-7 Living and Non Living Download File Living Science Solution ch-8 Getting to Know Plants Download File Living Science Sol ch-9 The Body and Its movements Download File Visit given link for full answer Class6 Living science solution Term-II

Class 10 Metal and Non MetalsChapter 03 NCERT Activity Solutions

X Class 10 NCERT Activity Explanation Class 10 Metals and Non Metals Activity 3.1 Page No. 37 Take samples of iron, copper, aluminium and magnesium. Note the appearance of each sample. They have a shining surface. Clean the surface of each sample by rubbing them with sand paper and note their appearance again. They become more shiny. => Freshly cut Metal have shiny surface Activity 3.2 Page No. 37 Take small pieces of iron, copper, aluminium, and magnesium. Try to cut these metals with a sharp knife and note your observations. They are very hard to cut. Hold a piece of sodium metal with a pair of tongs and try to cut it with a knife. Sodium can be cut easily with knife. Hence K and Na are soft metal cut with knife Activity 3.3 Page No. 38 Take pieces of iron, zinc, lead and copper try to strike it four or five times with a hammer. These metals are beaten into thin sheet on hammering. This property of metal is called malleability and metals are called malleable. Activity 3.4 Page

CBSE I NCERT 10th Numerical Problem solved Reflection and reflection of light

Q. 1. A concave mirror of focal length 20cm is placed 50 cm from a wall. How far from the wall an object be placed to form its real image on the wall?  Solution: V= -50 cm F= -20cm From mirror formula 1/u = 1/f – 1/v = -1/20+ 1/50 = - 3/100  U = - 33.3 cm Therefore, the distance of the object from the wall x =  50 – u X = 50 – 33.3 = 16.7 cm. Q.2. An object is placed at a distance of 40cm from a concave mirror of focal length 15cm. If the object is displaced through a distance of 20 cm towards the mirror, By how much distance is the image displaced? Answer: Here f = - 15 cm, u = - 40 cm Now 1/f = 1/u + 1/v Then 1/v = 1/f – 1/u Or V= uf/u-f =( - 40 x -15)/25 = -24 cm Then object is displaced towards the mirror let u1 be the distance object from the Mirror in its new position. Then u1 = -(40-20) = -20cm If the image is formed at a distance u1 from the mirror then v1 = u1f/u1-f = -20X-15/-20+15 = -60 cm. = - 20 x-15/-20+15 = -60 cm. Therefor

Electricity numerical for class 10 CBSE Trend Setter 50 Problems

1. The current passing through a room heater has been halved. What will happen to the heat produced by it? 2. An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds. 3. An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 4. A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute. 5. A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute. 6. 100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor? 7. An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating’ it consumes a power of 360 W but at ‘maximum heating’ it takes a power of 840 W. Ca